2018年8月29日星期三

Kia Hyundia Multiflasher Multi Flasher Car ECU programmer Multiflasher Chip Tuning Software for Hyundai/kia via OBD

Kia Hyundia Multiflasher Multi Flasher Car ECU programmer Supports J2534 Tactrix OpenPort 2.0. Multiflasher Chip Tuning Software allows to avoid flashing incorrect dumps or to make sure that reading is correct. OBD2Store.com Kia Hyundia Multiflasher Multi Flasher Car ECU programmer Multiflasher Chip Tuning Software for Hyundai/kia via OBD.

Kia Hyundia Multiflasher Car ECU Programmer New Multiflasher Multi Flasher ECU programmer & Gearbox Power Upgrade Tool for Hyundai/kia
http://www.obd2store.com/kia-hyundia-multiflasher-car-ecu-programmer-new-multiflasher-multi-flasher-ecu-programmer-gearbox-power-upgrade-tool-for-hyundaikia-p-2275.html

MultiFlasher from obd2store.com is a chip-tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

OBD2Store.com Multiflasher Chip Tuning Software Kia Hyundia Multiflasher Multi Flasher Car ECU programmer work modules list:

Full activation - $ 1,300
All the modules including discounts.

Bosch M(G)7.9.8 - $ 100
Only FLASH memory flashing through the OBDII diagnostic link connector.

Siemens SIMK-31/41/43, SIM2K-47 - $ 100
FLASH memory reading and flashing through the OBDII diagnostic link connector.

Set of Siemens SIM2K modules - $ 200
Siemens SIM2K-140/141/142/341/D160. FLASH memory reading through ECU connector and flashing through the OBDII diagnostic link connector. Vehicles: KIA/Hyundai Carens, Cerato new, Magentis, Sonata, Sorento, Sportage new, ix35, etc with 2.0L and 2.4L engines, and Chevrolet Epica with 2.0L and 2.5L engines. Siemens SIM2K-241/242/245/С201. Reading and flashing through the OBDII diagnostic link connector. Supports GDS format. Vehicles: Elantra MD 1.8, Sonata new, i40 2.0, ix35 new, Ceed new, Cerato new, Optima new, etc., SsangYong Actyon 2.0, Korando.

BSL TriCore - $ 400
Reading and flashing of ECU internal and external FLASH/EEPROM memory with Infineon TriCore TC1724, TC1728, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 processors in BSL mode. The approximate short list of supported ECUs BOSCH M(E)17.9.7 (VAZ/UAZ), and ME17, ME (D, G)17, EDC17 (AMG, Audi, BMW, Citroen, Honda, Hyundai, KIA, Land Rover, Mercedes, Mini, Peugeot, Porsche, Renault, Saab, Skoda, Toyota, Volkswagen, Volvo). Special features of the module: - verification/recalculation of checksums and BOSCH digital signature, Siemens/Continental SIM2K 240-245 checksums verification/recalculation; - protection passwords reading for BOSCH TPROT 8-10 VAG, TPROT 11-13 KIA/Hyundai, TPROT 12 M(E)17.9.71 VAZ/UAZ, GPT (a special adapter is required) and Siemens/Continental SID208 Ford, EMS2204 Ford, SIM2K-24x KIA/Hyundai/SsangYong/Chevrolet; - import of BOSCH and Siemens/Continental SIM2K 240-245 maps; - protection disabling in BOSCH M(E)17.9.71 VAZ/UAZ.

BSL TriCore - $ 200
For "ME 17.9.11/12" module users.

Bosch M(E)17.9.7 OBD - $ 150
Bosch M(E)17.9.7 OBD. Only VAZ/UAZ FLASH memory flashing through the OBDII diagnostic link connector. Special features: IMMO OFF without opening the ECU. Only for ME17.9.7 VAZ!!! Bosch M(E)17.9.71 VAZ/UAZ OBD. Only VAZ/UAZ FLASH memory flashing through the OBDII diagnostic link connector. Factory files can be written without any limitations, tuned ones – only to the prepared ECUs (in the BSL mode). Another special feature: defining the ECU protection state.

Bosch EDC17C08/CP14 KIA/Hyundai - $ 250
Only FLASH memory flashing through the OBDII diagnostic link connector.

Set of Bosch ME 17.9.11/12/13, Bosch MED(G) 17.9.8 and Bosch ME(G) 17.9.21 - $ 200
Only FLASH memory flashing through the OBDII diagnostic link connector. For factory and tuned files!

Siemens EMS2204 - $ 150
Only flashing of tuned and factory files through the OBDII diagnostic link connector. Supports VBF format. For Ford Focus III with a 1.6L engine.

Delphi DCM 3.7 SsangYong - $ 150
Firmware reading and flashing through the OBDII diagnostic link connector, all dumps checksums verification, maps checksums recalculation.

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

没有评论:

发表评论