2018年5月30日星期三

New Chrysler Witech Micropod ii VCI With V17.04.27 Witech 2 Software wiTEch Device Connection Error Solution

New Chrysler Witech Micropod ii VCI with wiTech MicroPod 2 software V17.04.27 support online programming with dealer account. China Witech Micropod 2 Clone can be work with internet for Chrysler, Dodge, Jeep, and Fiat vehicle platforms. OBD2Store.com New Chrysler Witech Micropod ii VCI With V17.04.27 Witech 2 Software wiTEch Device Connection Error Solution.

New Chrysler Witech Micropod ii VCI China Witech Micropod 2 Clone With V17.04.27 Witech 2 Software Support Online Programming
Chrysler Witech Micropod ii

One of New Chrysler Witech Micropod ii VCI users got the error"wiTEch Device Connection Error" showing:



Why Cause wiTEch Device Connection Error:


    wiTECH Diagnostic Application was installed and used by a user with “administrative” privileges on the PC and subsequently a user account with standard/restricted privileges attempts to use the application. The standard user does not have access to a file named “device” under C:ProgramDatawiTECHWDE (On Windows 7/Windows 8) folder.

    IP address conflicts/ network issue.

    The VCI device may have entered to a state where in it could not recover from an error condition.

OBD2Store.com New Chrysler Witech Micropod ii VCI With V17.04.27 Witech 2 Software wiTEch Device Connection Error Solution:

1.Close obd2store.com wiTECH Micropod 2 Diagnostic Application.

2.Quit the wiTECH Server from the Windows System Tray

3.Login to the PC/Laptop with a user account that has administrative privileges.

4.Locate the following directory on the PC/Laptop:

C:ProgramDatawiTECHWDE (On Windows 7/Windows 8)

5.Right click on the “device” file and select “Properties”

6.Select “Security” tab in the “device” file “Properties” window and select “Users” from the “Group or user names” section

If you do not see “Users” in the list of Groups, click on “Edit” button and click on “Add” button as shown below. Enter “Users” in the “Enter Object names to select” section and click on “Check Names” button and “OK” button to get the “Users” group added to the list of user groups.

7.Check the checkbox “Allow” for “Full control”. This will give full permission to all the Users of “device” file.

8.Click on “Apply” button and then click on “OK” button on the “Permissions” window and “device” file “Properties” window.

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: info@obd2store.com
Skype: live:obd2store_1
Whatapp: +86-13682550935

没有评论:

发表评论